Long Service Life of Discs Between Regrindings Mill for Plastic with Well Designed Grinding Chamber

Basic Info

Model NO.	PM500
After-sales Service	Localization Service
Warranty	Two Years
Type	Pulverizer Machine
Raw Material	Post-Consumer/Post Industry/in-House Plastic Waste
Structure	Top Feed
Knife Classification	Disc Pulverizer
Knife Roll	Solid Knife Roller
Automation	Automatic
Computerized	Computerized
Certification	CE, ISO9001:2008, TUV;BV;SGS
Name	Pulverizer Machine
Electric Components	ABB, Ls, Omron, or Customized
Control	P.L.C Control
Sample/Service Manua	Available
Factory Location	2 Hours Drive From Shanghai
After-Sale Service	Free Spare Parts
Advantage	Famous Brand Motor
Business Type	Manufacturer
Material	Iron
OEM	Available
Transport Package	Wooden Pallet
Specification	Customzied
Trademark	ACERETECH
Origin	Jiangsu Zhangjiagang
HS Code	8477209000
Production Capacity	10 Set/Sets Per Month

Product Description

Long Service Life Of Discs Between Regrindings Mill For Plastic With Well Designed Grinding Chamber

Product Description

Applications
The pulverizer is suitable for the pulverization of semi-rigid, brittle and impact resistant materials that require powdered products.Particles with a size of 6-8 mm are fed through a vibrating screen into a rotating high-speed sawtooth disc to produce a powder product in the desired 300-1000 micron range, with the final size determined by adjustable disc spacing. Typically used for shredding LDPE, HDPE, UPVC, PC and various other plastics.
Design
The PM500 pulverizer series are ultra-high output units that can be equipped with automatic temperature control. The material to be pulverized is fed centrally between fixed and high-speed rotating pulverizing discs, which have a centrifugal effect, allowing the material to pass through the processing zone and then be pneumatically discharged from the machine.
Advantages
* Long service life of discs between regrindings.* Replace and adjust discs quickly and easily.* Low residence time means low thermal stress on the process material.* High throughput capabilities.* Cost effective operation.
Flow chart

Technical features
* Dosing channel/Vibratory feeder* The channel width is 100 - 250mm, and the storage container is appr. 50-100 lit.* The feeding is regulated and consumed by the high current controller monitoring the pulverizer motor, including the mounting bracket and control device.
Pulverizer housing
* Disc pulverizer with a fixed and a high-speed toothed disc with precision bearings.* Material is fed through the opening in the center of the fixed disc.* The size of the particles depends on the surface structure of the teeth and the adjustable distance between the tooth discs. The cutting clearance can be checked through the inspection hole in the housing. This makes it easy to adjust from the outside of the device using a feeler gauge. The device operates without a screen.* The machine housing is made of fracture resistant welded steel. The hinged housing door with fixed toothed disc opens to the side for cleaning and replacing the toothed disc. * The grinding chamber is well designed with a small cross-section and a flat, almost vertically mounted grinding disc.* The material is clamped and reduced immediately after entering the grinding chamber.
Pulverizer discs
* Specially designed discs and high-speed peripheral running speed ensure efficient impact reduction under low power requirements.* Pulverizer disc diameter 500 m
Temperature control
The enhanced cooling device for automatically controlling the temperature includes a nozzle for spraying in cooling water, regulating control devices, solenoid valves, thermostats, an automatic control device and a material feeding switch.
Drive and mounting frame
A flat steel structure is used to install the pulverizer and suction box. The drive motor includes "V" belt drive and belt guard. The frame is equipped with pre installed anti vibration pads.
Safety devices
Integrated operational safety device to prevent entry until the rotor is completely stationary.

Product Parameters

PM300 Series Pulverizer Machine
Raw material	H-PVC-Profile ,H-PVC-Pine ,LDPE(MFI70) and etc.
Final product & capacity	250~500kg/h, depends on condition of client's material.
Electric current	3×380V, 50Hz; control current 220V, 50Hz
Model	PM500
Profile- H-PVC	400-500 kg/h
Pipe- H-PVC	450-600 kg/h
PE	250-300 kg/h
Rotor speed	5250 rmp
Disc diameter	500 mm
Tooth grooves	2.62
Drive motor	55 kw

Detailed Photos

Company Profile

FAQ

YOU ARE WELCOME TO OUR FACTORY AT ANY TIME* ACERETECH is original manufacturer.* If you interested in our products and we can fulfill your request , you may pay a visit to ACERETECH Factory.* The meaning of visiting supplier, since seeing is believing, ACERETECH Machinery with own manufacture and developed& research team, we can send you engineers and make sure the high efficiency after-sales service.

SEE ACERETECH MACHINE HOW TO ENSURE THE QUALITY* In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.* Each component before assembly needs strict control by inspecting personnel.* Each assembly is in charge by a master who has working experience for more than 15 years* After all the equipment are completed, we will connect all the machines and run the full production line for at least 12 hours to ensure the stable running in customers' factoryTHE AFTER-SALE SERVICE OF ACERETECH MACHINERY* After finishing the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools.* After the commissioning, we will package the equipment by the standard export package for shipment.* According to the customer's request, we can arrange our engineers to customers' factories to do the installation and training.* Engineers, sales managers, and after-sales service managers will form an after-sales team, online and offline, to follow the customers' project.

IF YOU WOULD LIKE TO KNOW MORE ABOUT US, PLEASE CONTACT US